APCS the Signal Conditioning Specialists

 

USC Home

USC701

The USC701 is a Universal Signal Conditioner a signal conditioning module capable of replacing many other SCM's without any hardware change.

The USC701 can be connected to a personal computer using the COA703 computer adaptor.

The free configuration software USC700 contains a New Module Wizard, this wizard is used to create a USC program (module definition). The module definitions are displayed in block format on the property screen. Most common signal conditioning module types can easily be made using the new module wizard.

Previously made module definitions are stored in a single data base file on your PC and can be opened closed and copied using the file/open new menu. Module definitions can also be exchanged between system over the Internet or on disk using the file/import/export commands.

Pre-made linearization tables that are selected automatically when measuring temperatures from thermocouples and RTD's however custom tables can easily be created and stored within the one USC Program.

The equation editor is used to customise the functionality of the USC701. Math functions, branching commands and update time create a powerful and versatile tool.

While the equation editor creates complex functions usually there are one or two variables within the equation that you wish the end user to have easy access to. This is accomplished by creating a configurable user interface.


USC700 Programmer

The USC700 Programmer is a Windows application used to configure the USC701. A COA703 is required to connect the USC701 to a USB port on the personal computer.

The USC700 Programmer can create or open existing new USC programs.

 

New Module Wizard

New Module Wizard

New Module Wizard

When starting a new program the new "New Module Wizard" will guide you through hundreds of possible signal module types.

 

Setting CH1 Example

Each wizard screen will allow you to set the parameters for each of the components within the USC701. The following screen will configure channel 1 in the USC as a type J thermocouple input. Please note that no hardware changes are required to change input type or range.

Setting CH1 Example

Setting CH1 Example

 

The Properties Screen

  • The USC properties screen displays completed USC programs and allows changes to be made.
  • As the CH1 button is pressed the list box on the right is displaying CH1 properties.
  • The first column of buttons represents the USC inputs.
  • The second column of buttons represents the equation memory outputs.
  • The third column of buttons represents the USC outputs.
  • CH2, P1, P2 and RLY2 are all displayed as disabled, as they have not been programmed for use.
USC700 Properties Screen

USC700 Properties Screen

 

The Equation Editor

The equation is a reverse polish scientific 5 stack calculator that has 7 user memories accessible to external USC output components, 10 internal run time variables, 8 non-volatile memories, basic branching and scientific function support.

The Equation Editor

The Equation Editor


Linearise or Lookup Tables

The USC701 can use up to four look up tables at any one time.These table are available for use either directly when using the wizard on input components or within the equation editor. Each table has 101 points spread evenly over the required range entered by the user.

User created tables can be created by an external program and imported from a text file or created from 2 to 101 points entered by the user.

All points can be individually edited while within the look up table screen shown below. The graph will update as point values are changed.

USC Linearise or Lookup Tables

USC Linearise or Lookup Tables


Download USC700 Programmer

SL300/USC700  Setup Options

The USC700 Programmer is a repackaged version of USC Config 106. The run time files and installer have been updated to run on Windows versions XP to 10.

  • System Requirements: Microsoft Windows XP and above
  • Interface Isolation module: Computer Adaptor COA703-01 or COA703-02.

All of the following are supplied from the one DOWNLOAD package SetupSL300_USC700-YYMMC.exe.

  • SL300 PC Programmer
  • USC700 Programmer
  • USB driver (32/64 bit detected)
SL300/USC700 Programmer Setup
SetupSL300_USC700-16051.exe

USC Config 106 Product Setup Program

Discontinued use, USC700 Programmer.

The USC700 programmer may be run without un-installing previous versions of the USC700 programmer.

The USC Config 106 package is totally independant of USC700 and may be left or uninstalled seperately. Saved programs within the USC Config 106 need to be exported seperately before uninstalling the program.


USC Config 105 Product Setup Program

USC Config 105 has not been tested on any version > Windows XP and should only be used on USC701 modules that contain a software version less than 1.05.99 or before 2001. This SETUP installs run time files necessary to run "USC Config 105" on a windows PC.

USC Config 105 Product Setup
setup105r86.exe
Information

USC Config 105 Product Patch Program

To determine if it is necessary, the revision of the currently installed program is displayed from the edit menu and select About. The revision is the last two digits of the version number (Version 1.5.87 = revision 87)

Click here to download uscpatch105r87.exe (630 kb)

Run the patch program and install in the default locations (if installed in the recommended locations)

Start "USC Config 105" in the usual way, any previously made data will still be intact.

USC Config 105 Product Patch
uscpatch105r87.exe
Information

USC Applications

Applicatications are found here.